DELTA 37-361 12-Inch 3 Horsepower 230-Volt Jointer, 1 Phase

14.7.12 Posted by Sale

DELTA 37-361 12-Inch 3 Horsepower 230-Volt Jointer, 1 Phase for Sale - Review & Buy at Cheap Price





List Price : $7,875.00






Price : $4,076.96










DELTA 37-361 12-Inch 3 Horsepower 230-Volt Jointer, 1 Phase Feature | Sale - Review & Buy at Cheap Price


  • Center-mounted fence safely encloses the rear of the cutterhead when working to the front of the machine
  • Rack and pinion movement for smooth, precise adjustment.
  • Infeed and outfeed tables have an easy-to-use lever for raising and lowering table bed
  • Parallelogram support system allows the table to move up or down in the same arc as the cutterhead
  • Hinged door and removable door panel allow for easy access to the motor and V-belts





DELTA 37-361 12-Inch 3 Horsepower 230-Volt Jointer, 1 Phase Feature for Sale - Review & Buy at Cheap Price


  • Center-mounted fence safely encloses the rear of the cutterhead when working to the front of the machine
  • Rack and pinion movement for smooth, precise adjustment.
  • Infeed and outfeed tables have an easy-to-use lever for raising and lowering table bed
  • Parallelogram support system allows the table to move up or down in the same arc as the cutterhead
  • Hinged door and removable door panel allow for easy access to the motor and V-belts

[if The DELTA 37-361 12-inch, 3 HP Jointer features a center-mounted fence which safely encloses the rear of the cutterhead when working in front of the machine for maximum safety. The rack and pinion design ensures smooth operation and the parallelogram support system allows the table to move with the cutterhead which produces more efficient cutting, less tear-out, and safer operation. The three HP, single-phase motor powers the three-knife cutterhead configuration at speeds of 3,450 RPM, which produces a cutterhead speed of 15,000 CPM. The long 84-inch table makes it easy to handle large workpieces.]

DELTA 37-361 12-Inch 3 Horsepower 230-Volt Jointer, 1 Phase Overview for Sale - Review & Buy at Cheap Price


The DELTA 37-361 12-inch, 3 HP Jointer features a center-mounted fence which safely encloses the rear of the cutterhead when working in front of the machine for maximum safety. The rack and pinion design ensures smooth operation and the parallelogram support system allows the table to move with the cutterhead which produces more efficient cutting, less tear-out, and safer operation. The three HP, single-phase motor powers the three-knife cutterhead configuration at speeds of 3,450 RPM, which produces a cutterhead speed of 15,000 CPM. The long 84-inch table makes it easy to handle large workpieces.


DELTA 37-361 12-Inch 3 Horsepower 230-Volt Jointer, 1 Phase Specifications



DELTA 37-361 12-Inch 3 Horsepower 230-Volt Jointer, 1 Phase The DELTA 37-361 12-inch, 3 HP Jointer features a center-mounted fence which safely encloses the rear of the cutterhead when working in front of the machine for maximum safety. The rack and pinion design ensures smooth operation and the parallelogram support system allows the table to move with the cutterhead which produces more efficient cutting, less tear-out, and safer operation. The three HP, single-phase motor powers the three-knife cutterhead configuration at speeds of 3,450 RPM, which produces a cutterhead speed of 15,000 CPM. The long 84-inch table makes it easy to handle large workpieces.


Reviews More...


Available at Amazon Check Price Now!




*** Product Information and Prices Stored: Jul 14, 2012 21:00:04








See Also : Sale Malls casio camera cord vizio tv hdtv m22ova

Tormek T-7 Water Cooled Sharpening System

9.7.12 Posted by Sale

Tormek T-7 Water Cooled Sharpening System for Sale - Review & Buy at Cheap Price





List Price : $630.00






Price : $630.00










Tormek T-7 Water Cooled Sharpening System Feature | Sale - Review & Buy at Cheap Price


  • Designed for the Toughest Work
  • Can Run Continuously without Overheating
  • 10-Inch Grindstone
  • Strong 1/8-Inch Steel Housing
  • Industrial Motor and Stainless Steel Hardware





Tormek T-7 Water Cooled Sharpening System Feature for Sale - Review & Buy at Cheap Price


  • Designed for the Toughest Work
  • Can Run Continuously without Overheating
  • 10-Inch Grindstone
  • Strong 1/8-Inch Steel Housing
  • Industrial Motor and Stainless Steel Hardware

[if The most complete edition of the finest wet stone sharpening system available, the T-7 is rated for continuous use and has a vast array of specialty jigs available so you can quickly and easily sharpen virtually any tool in your house, backyard shed or workshop. The heart of the T-7 is the Tormek SG-250 10" x 2" grinding wheel turning at a slow 90 rpm through water which acts as a lubricant for faster grinding while it continuously cools the tool edge to prevent "bluing" the metal. After grinding, the 8-3/4" x 1-1/4" genuine leather honing wheel gently removes the burr and hones the edge to razor sharpness. The T-7 System also includes the Angle Master, Honing Compound, Stone Grader, Diamond Truing Tool, Square Edge Jig, and Handbook and Instructional DVD. Seven-year warranty.]

Tormek T-7 Water Cooled Sharpening System Overview for Sale - Review & Buy at Cheap Price


The most complete edition of the finest wet stone sharpening system available, the T-7 is rated for continuous use and has a vast array of specialty jigs available so you can quickly and easily sharpen virtually any tool in your house, backyard shed or workshop. The heart of the T-7 is the Tormek SG-250 10" x 2" grinding wheel turning at a slow 90 rpm through water which acts as a lubricant for faster grinding while it continuously cools the tool edge to prevent "bluing" the metal. After grinding, the 8-3/4" x 1-1/4" genuine leather honing wheel gently removes the burr and hones the edge to razor sharpness. The T-7 System also includes the Angle Master, Honing Compound, Stone Grader, Diamond Truing Tool, Square Edge Jig, and Handbook and Instructional DVD. Seven-year warranty.

Combining a water-cooled, slow-speed, durable grindstone with an angle guide for precision, the Tormek T-7 Water-Cooled Sharpening System is ideal for professional sharpening applications. The T-7 improves the ease, accuracy, and safety in edge tool sharpening thanks to two innovations: a Square Edge Jig and a Diamond Truing and Dressing Tool. The SE-76 Square Edge Jig automatically aligns the chisel for precision sharpening, and the Diamond Truing and Dressing Tool helps you keep the stone in perfect condition, which is essential for a perfectly sharpened edge.

PowerCost Monitor WiFi Logo
T-7 Water-Cooled
Sharpening System
At a Glance:
  • Wet-grinding system increases tool life and won't overheat the tool edge

  • Square Edge Jig lines up the chisel at 90 degrees each time--without any adjustment

  • AngleMaster lets you set the angle of the jig to the grindstone and can measure the existing edge angle of a tool

  • Diamond Truing and Dressing Tool with screw feed evens stone surface

  • Stainless steel shaft with E-Z Lock feature for tool-free grindstone removal

  • Rated for continuous use

  • Seven-year warranty (includes commercial use)
Blue Line Innovations Logo
T-3 Sharpening System
Ideal for sharpening woodworking hand tools, knives, and scissors.

Wet Grinding Increases Tool Life
The slow-speed, wet grindstone of the Tormek T-7 uses less friction than a dry grinder and won't remove as much material from the tool during sharpening, giving you a sharp, clean result and a longer-lasting edge. Unlike with dry grinding, you won't have to worry about burr build-up, overheating, or the need for frequent sharpening.



Purpose-Designed Jigs for Perfect Control
With 11 jigs available for most types of wood-working tools, knives, and industrial tools, the Tormek T-7 maintains the precise edge and angle for each specific tool. It removes only a fraction of the steel, and the jigs guide your tools for accurate and efficient control of the shape and edge angle.

The Tormek T-7 comes with a square-edge jig for chisels and plane blades, and there are additional jigs available for knives, scissors, axes, gouges, and more.




SE-76 Square Edge Jig
Aligns a wood chisel automatically parallel to the Universal Support.
View larger.
Adjustment-Free Jig Aligns Squarely
The included SE-76 Square Edge Jig is ideal for quickly clamping and holding chisels, plane irons, and even short and tapered chisels (like Japanese chisels) for accurate sharpening. Conventional jigs require that you align the tool in the jig with two mounting screws, a time-consuming process that results in loss of accuracy. The new Tormek Square Edge jig solves this problem by squarely lining up the chisel at 90 degrees each time--without any adjustments. This is achieved because the jig automatically aligns the chisel to its flat, machined face.

The SE-76 jig can handle blades up to 76 millimeters or 3 inches in width, and it includes safety stops, which prevent tools from slipping off the stone.




Universal Support
The Universal Support incorporates a micro adjust for fine setting.
View larger.
Universal Support Makes Sharpening Easy
The Universal Support mounts vertically or horizontally to the base of the Tormek T-7. Simply raise and lower the Universal Support with the help of the AngleMaster to achieve the desired sharpening angle, or mount it horizontally for honing away from the edge. Honing on the leather honing wheel can be performed with or without the SE-76 jig and with the Universal Support as a tool rest.




Angle Master
Grinds your tool to any desired edge angle from 10° to 75°. View larger.
Angle Master Achieves the Exact Angle Every Time
Regardless of wear and tear on the grindstone, the included AngleMaster will help you achieve the exact angle you need every time. With a range of 10 to 75 degrees, the AngleMaster allows you to set the angle of the jig to the grindstone, and it can also measure the existing edge angle of a tool. For further convenience, magnets keep the AngleMaster securely in place.




Stone Grader
The stone grinds very effectively and gives a fine finish to the tool. View larger.
Stone Grader Adds Versatility for Sharpening and Polishing
The Tormek T-7 Original Grindstone can be dressed to 220 grit or 1,000 grit for versatility. The stone comes with a 220-grit surface, and the included Stone Grader allows you to quickly and easily change the surface to 1,000 grit for fine polishing. Since you won't have to change the jig or the stone, the Stone Grader allows you to perform both efficient steel removal and a fine finish with one stone.



Large Wheel, Powerful Motor, and E-Z Lock Shaft
The Tormek T-7 uses a 10-inch by 2-inch stone wheel, giving you a wide and durable surface for sharpening. The powerful, heavy-duty motor turns the wheel at 90 rpm and can be run continually. For further convenience, the T-7's stainless steel shaft with E-Z Lock feature means you can remove the grindstone without tools.



Truing and Dressing Tool
With TT-50, you can true and dress your grindstone round and flat.
View larger.
Truing and Dressing Tool for a Perfectly Sharpened Edge
Using a cluster of diamonds to smooth the surface of the stone, the included Truing and Dressing Tool with screw feed can restore a worn stone to an even surface. It mounts and locks instantly on the Universal Support, ensuring that the stone surface is always parallel to the tool fitted in the jig. This enables you to keep the stone in perfect condition, which is essential for a perfectly sharpened edge.



Clean and Safe Sharpening
The T-7's advanced water trough comes with an enlarged standard lip for maximum water collection. It also includes an embedded magnet to collect steel particles and a removable water chute for long tools. Because steel particles are deposited into the water trough and wet-grinding doesn't create grinding dust, there is no need to worry about air pollutants. The low speed also eliminates sparks and allows the operator to have complete control of the tool.

The Tormek T-7 Water-Cooled Sharpening System is backed by a manufacturer's seven-year limited warranty, which includes commercial use.



What's in the Box
Tormek T-7 Water-Cooled Sharpening System, Square Edge Jig, AngleMaster, Honing Compound, Handbook, Truing tool, Stone grader, Accessory tray for storage, and instructional DVD.



Tormek T-7 Water Cooled Sharpening System Specifications


Combining a water-cooled, slow-speed, durable grindstone with an angle guide for precision, the Tormek T-7 Water-Cooled Sharpening System is ideal for professional sharpening applications. The T-7 improves the ease, accuracy, and safety in edge tool sharpening thanks to two innovations: a Square Edge Jig and a Diamond Truing and Dressing Tool. The SE-76 Square Edge Jig automatically aligns the chisel for precision sharpening, and the Diamond Truing and Dressing Tool helps you keep the stone in perfect condition, which is essential for a perfectly sharpened edge.

PowerCost Monitor WiFi Logo
T-7 Water-Cooled
Sharpening System
At a Glance:
  • Wet-grinding system increases tool life and won't overheat the tool edge

  • Square Edge Jig lines up the chisel at 90 degrees each time--without any adjustment

  • AngleMaster lets you set the angle of the jig to the grindstone and can measure the existing edge angle of a tool

  • Diamond Truing and Dressing Tool with screw feed evens stone surface

  • Stainless steel shaft with E-Z Lock feature for tool-free grindstone removal

  • Rated for continuous use

  • Seven-year warranty (includes commercial use)
Blue Line Innovations Logo
T-3 Sharpening System
Ideal for sharpening woodworking hand tools, knives, and scissors.

Wet Grinding Increases Tool Life
The slow-speed, wet grindstone of the Tormek T-7 uses less friction than a dry grinder and won't remove as much material from the tool during sharpening, giving you a sharp, clean result and a longer-lasting edge. Unlike with dry grinding, you won't have to worry about burr build-up, overheating, or the need for frequent sharpening.



Purpose-Designed Jigs for Perfect Control
With 11 jigs available for most types of wood-working tools, knives, and industrial tools, the Tormek T-7 maintains the precise edge and angle for each specific tool. It removes only a fraction of the steel, and the jigs guide your tools for accurate and efficient control of the shape and edge angle.

The Tormek T-7 comes with a square-edge jig for chisels and plane blades, and there are additional jigs available for knives, scissors, axes, gouges, and more.




SE-76 Square Edge Jig
Aligns a wood chisel automatically parallel to the Universal Support.
View larger.
Adjustment-Free Jig Aligns Squarely
The included SE-76 Square Edge Jig is ideal for quickly clamping and holding chisels, plane irons, and even short and tapered chisels (like Japanese chisels) for accurate sharpening. Conventional jigs require that you align the tool in the jig with two mounting screws, a time-consuming process that results in loss of accuracy. The new Tormek Square Edge jig solves this problem by squarely lining up the chisel at 90 degrees each time--without any adjustments. This is achieved because the jig automatically aligns the chisel to its flat, machined face.

The SE-76 jig can handle blades up to 76 millimeters or 3 inches in width, and it includes safety stops, which prevent tools from slipping off the stone.




Universal Support
The Universal Support incorporates a micro adjust for fine setting.
View larger.
Universal Support Makes Sharpening Easy
The Universal Support mounts vertically or horizontally to the base of the Tormek T-7. Simply raise and lower the Universal Support with the help of the AngleMaster to achieve the desired sharpening angle, or mount it horizontally for honing away from the edge. Honing on the leather honing wheel can be performed with or without the SE-76 jig and with the Universal Support as a tool rest.




Angle Master
Grinds your tool to any desired edge angle from 10° to 75°. View larger.
Angle Master Achieves the Exact Angle Every Time
Regardless of wear and tear on the grindstone, the included AngleMaster will help you achieve the exact angle you need every time. With a range of 10 to 75 degrees, the AngleMaster allows you to set the angle of the jig to the grindstone, and it can also measure the existing edge angle of a tool. For further convenience, magnets keep the AngleMaster securely in place.




Stone Grader
The stone grinds very effectively and gives a fine finish to the tool. View larger.
Stone Grader Adds Versatility for Sharpening and Polishing
The Tormek T-7 Original Grindstone can be dressed to 220 grit or 1,000 grit for versatility. The stone comes with a 220-grit surface, and the included Stone Grader allows you to quickly and easily change the surface to 1,000 grit for fine polishing. Since you won't have to change the jig or the stone, the Stone Grader allows you to perform both efficient steel removal and a fine finish with one stone.



Large Wheel, Powerful Motor, and E-Z Lock Shaft
The Tormek T-7 uses a 10-inch by 2-inch stone wheel, giving you a wide and durable surface for sharpening. The powerful, heavy-duty motor turns the wheel at 90 rpm and can be run continually. For further convenience, the T-7's stainless steel shaft with E-Z Lock feature means you can remove the grindstone without tools.



Truing and Dressing Tool
With TT-50, you can true and dress your grindstone round and flat.
View larger.
Truing and Dressing Tool for a Perfectly Sharpened Edge
Using a cluster of diamonds to smooth the surface of the stone, the included Truing and Dressing Tool with screw feed can restore a worn stone to an even surface. It mounts and locks instantly on the Universal Support, ensuring that the stone surface is always parallel to the tool fitted in the jig. This enables you to keep the stone in perfect condition, which is essential for a perfectly sharpened edge.



Clean and Safe Sharpening
The T-7's advanced water trough comes with an enlarged standard lip for maximum water collection. It also includes an embedded magnet to collect steel particles and a removable water chute for long tools. Because steel particles are deposited into the water trough and wet-grinding doesn't create grinding dust, there is no need to worry about air pollutants. The low speed also eliminates sparks and allows the operator to have complete control of the tool.

The Tormek T-7 Water-Cooled Sharpening System is backed by a manufacturer's seven-year limited warranty, which includes commercial use.



What's in the Box
Tormek T-7 Water-Cooled Sharpening System, Square Edge Jig, AngleMaster, Honing Compound, Handbook, Truing tool, Stone grader, Accessory tray for storage, and instructional DVD.



Tormek T-7 Water Cooled Sharpening System The most complete edition of the finest wet stone sharpening system available, the T-7 is rated for continuous use and has a vast array of specialty jigs available so you can quickly and easily sharpen virtually any tool in your house, backyard shed or workshop. The heart of the T-7 is the Tormek SG-250 10" x 2" grinding wheel turning at a slow 90 rpm through water which acts as a lubricant for faster grinding while it continuously cools the tool edge to prevent "bluing" the metal. After grinding, the 8-3/4" x 1-1/4" genuine leather honing wheel gently removes the burr and hones the edge to razor sharpness. The T-7 System also includes the Angle Master, Honing Compound, Stone Grader, Diamond Truing Tool, Square Edge Jig, and Handbook and Instructional DVD. Seven-year warranty.


Reviews More...


Available at Amazon Check Price Now!




*** Product Information and Prices Stored: Jul 09, 2012 19:38:55








Visit : Sale dell cheap jokesk8 adidas shoes zxz adv